DCS World

Iceberg · 23 Janvier 2016 à 12:33:31

Update DCS

RAZBAM DCS M-2000C
Fixed TACAN range units
Fixed clicking sound when in easy comm mode
Increased drag of wing tanks
Corrected rate limit of servo-actuator dynamics
Made multiple corrections to engine performance
Corrected gear lever handle operation and animation
Corrected fuselage drag for more correct performance
Corrected multiple missing inputs (gear up/down, airbrake up/down individual inputs)
Corrected flickering for HUD symbology when WOW going on/off
Fixed the issue where an engine sound could be heard even though aircraft is cold
Added engine out due to extended periods of negative vertical acceleration and fuel accumulator is exhausted
Hydraulic pressure 1 and 2 gauge animated
Cabin altitude gauge animated and calculation updated
Fixed Select altitude off by one
Fixed control surfaces moving even when no hydraulic pressure available (either normal or emergency)
Fixed cover switches being able to switch even with cover on
Added flameout logic for loss of airflow into the engine and various mass flow correction for ambient conditions and aircraft state
Fixed issue with left/right main gear modeled slightly differently (caused pulling to one side on takeoff/landing)
FBW disconnect switch now FBW gain mode switch (see link below)
Corrected control effectiveness at extreme angles of attack
Correct burner diameter
Adjusted vertical tail effectiveness at extreme angles of attack
Added transonic drag effects
Afterburner glow and flame now based on actual burner stage combustion temperature (not AB throttle position)
Input file fixes in preparation for localization
Gear modeling improvements
Added keyboard control for all flight controls (pitch, roll, yaw, throttle)
Default view improvement (based on input from community with minor alterations)
AP heading fixes when command was cross 0 North while transition to commanded heading
Engine nozzle position logic fixes
Affect lift on portion of wing where air brake is when extended
Filter on longitudinal acceleration
Altimeter setting now functional
Added animation to lights to be shown in multiplayer
Fixed intake cones position mismatch
Fixed nose gear door 3D collision bug
Sustained turned rate improvements
Autopilot control and engagement envelope logic corrected
AA FBW mode now proper config with center tank loaded
Added joystick mappable commands for FBW commands and seat adjust
Fuel flow schedule fixes
Buddy lasing functional (and ability for M-2000C to use JTAC)
Updated manual
M-2000C viewable in multiplayer for those that don't own it
New Liveries
Fix for kneeboard not showing up
Small gun snake logic fix
FPM marker caged below 50 knots
HUD alignment fixes
Fix for Mach indicator on HUD getting out of sync
Inversed light for Landing Gear handle fixed
Master Warning/Caution system fixed
Unnecessary folder in CoreMods fixed
Error in INS code fixed
Missing icons for M-2000C fixed

Menfin · 23 Janvier 2016 à 16:34:02

et depuis cette mise à jour j'ai enfin les 2000-C qui apparaissent dans l'éditeur

Iceberg · 23 Janvier 2016 à 18:28:51

Vol en Huey avec Jo:

Jo Le Trembleur · 23 Janvier 2016 à 18:49:47

En vous remerkiant

Iceberg · 25 Janvier 2016 à 23:14:03

Co pilote de Jo est mort merde!

Iceberg · 28 Janvier 2016 à 07:07:10

pour corriger le bug de rechargement des Chaff et Flares lors du réarmement sur le M2000C

CiterEagle Dynamics\DCS World\CoreMods\aircraft\M-2000C\M-2000C.lua

passivCounterm = {
CMDS_Edit = false,
SingleChargeTotal = 128,
chaff = {default = 112, increment = 112, chargeSz = 1},
flare = {default = 16, increment = 16, chargeSz = 1},

Par défaut "increment" est à "0", c'est ça le "bug" corrigeable en quelques secondes et non corrigé avec le dernier patch...

Iceberg · 03 Février 2016 à 19:08:59

From Razbam Sim

CiterSo..we got a new 3d artist/developer joining our DCS ranks, please welcome Egar and his Emb-312 Tucano. These are early renders and the model is currently going thru extensive work to make it DCS functional.
The model might look familiar to some, since it has been marketed as "APEX Emb-312" for the FSX/P3D community.The DCS version will be marketed under the RAZBAM brand for the DCS comunity and will be based (after it´s done it´s fair to say loosely based) on this very same mesh.As usual, no release dates or deadlines, it will be ready..when ready
Welcome aboard Egar!